Synthetic Diesel Oils

Synthetic Diesel Oils

	AMSOIL Premium API CJ-4 Synthetic 5W-40 Diesel Oil (DEO) Maximum Fuel Economy and Extended Drain Intervals in Ultra-Low Emission Diesel Engines. AMSOIL 5W-40 Synthetic Diesel Oil (DEO) is the premium choice for API CJ-4 emission-quality diesel oil required by model-year 2007 and newer diesel engines. It delivers extraordinary lubrication in diesel engines found in commercial, fleet and personal vehicles. Built with the latest additive and synthetic base oil technology, AMSOIL Premium 5W-40 Synthetic Diesel Oil exceeds the higher performance demands of modern engines. It withstands the stress of heat, soot and acids to help prevent deposits, wear and corrosion. AMSOIL Synthetic 5W-40 is wax-free with a broad viscosity range to provide exceptional cold-weather starting and high-temperature protection. It resists breakdown and offers maximum fuel efficiency over extended drain intervals. Meets Emission System Requirements, Extended Drain Performance, Improves Fuel Economy, Minimizes Oil Consumption and Emissions, Controls Soot-Thickening and Wear SAE 5W-40 • API CJ-4, CI-4+, CF, SM, ACEA E7, E9 • Mack EO-O Premium Plus, DDC Power Guard 93K218, Caterpillar ECF-3, ECF-2, Cummins 20081, Volvo VDS-4, MB 228.31, MTU Type I & II, MAN 3275, JASO DH-2, Global DHD-1, Renault RLD-3 SERVICE LIFE AMSOIL Premium API CJ-4 Synthetic 5W-40 Diesel Oil (DEO) is recommended for extended drain intervals in engines that are unmodified and in good operating condition: Diesel Engine Service Three times (3X) OEM* recommendation, not to exceed 50,000 miles/600 hours or one year, whichever comes first. Drain intervals may be extended further with oil analysis. 2007-2009 Caterpillar C13 and C15 on-highway engines must follow OEM drain interval. 2007-Present Dodge, Ford and GM light-duty diesel pickups must follow OEM-recommended drain interval. Drain intervals may be extended with oil analysis. Gasoline Engine Service Two times (2X) OEM* recommendation, not to exceed 15,000 miles or one year, whichever comes first. Operating conditions and drain intervals for normal and severe service are defined by the OEM. Refer to your owner’s manual. Note: Extended drain intervals are not recommended when using biofuels containing >10% ethanol or 5% biodiesel (B5). Follow OEM drain intervals or extend drain intervals with oil analysis. Product Code: DEO* Order
	AMSOIL Premium API CJ-4 Synthetic 15W-40 Diesel Oil (DME) Superior Shear Stability and Extended Drain Intervals in Ultra-Low Emission Diesel Engines. AMSOIL Synthetic 15W-40 Diesel Oil (DME) is the premium choice for API CJ-4 emission-quality diesel oil required by model-year 2007 and newer diesel engines. AMSOIL Synthetic 15W-40 Diesel Oil (DME) is the premium choice for API CJ-4 emission-quality diesel oil required by model-year 2007 and newer diesel engines. It delivers extraordinary lubrication in diesel engines found in commercial, fleet and personal vehicles. Built with the latest additive and synthetic base oil technology, AMSOIL Premium Synthetic 15W-40 Diesel Oil exceeds the higher performance demands of modern engines. It withstands the stress of heat, soot and acids to help prevent deposits, corrosion and wear. Exceeds Emission System Requirements, Extended Drain Performance, Controls Soot-Thickening and Wear, Superior Shear Stability, Reduced Oil Consumption, Ideal for Fleets SAE 15W-40, API CJ-4, CI-4+, CF, SM, ACEA E7, E9, Mack EO-O Premium Plus, DDC Power Guard 93K218, Caterpillar ECF-3, ECF-2, Cummins CES 20081, Volvo VDS-4, MB 228.31, MS10902, MTU Type I & II, MAN 3275, JASO DH-2, Global DHD-1, Renault RLD-3 SERVICE LIFE AMSOIL Premium API CJ-4 Synthetic 15W-40 Diesel Oil (DME) is recommended for extended drain intervals in engines that are unmodified and in good operating condition. Diesel Engine Service Three times (3X) OEM* recommendation, not to exceed 50,000 miles/600 hours or one year, whichever comes first. Drain intervals may be extended further with oil analysis. 2007-2009 Caterpillar C13 and C15 on-highway engines must follow OEM-recommended drain interval. 2007-Present Dodge, Ford and GM light-duty diesel pickups must follow OEM-recommended drain interval. Drain intervals may be extended with oil analysis. Gasoline Engine Service Two times (2X) OEM* recommendation, not to exceed 15,000 miles or one year, whichever comes first. Operating conditions and drain intervals for normal and severe service are defined by the OEM. Refer to your owner’s manual. Note: Extended drain intervals are not recommended when using biofuels containing >10% ethanol or 5% biodiesel (B5). Follow OEM drain intervals or extend drain intervals with oil analysis. Product Code: DME* Order
	OE 15W-40 Synthetic Diesel Oil (OED) AMSOIL OE 15W-40 Synthetic Diesel Oil provides excellent protection and performance in both on- and off-road diesel engines for the original equipment manufacturer’s recommended drain interval. It meets API CJ-4 specifications and is suitable for both modern and older diesel applications. AMSOIL OE 15W-40 Synthetic Diesel Oil exceeds the higher performance demands of modern engines and withstands the stress of heat, soot and acids to help prevent deposits, wear and corrosion. Meets Emission System Requirements, Extreme-Temperature Performance, Resists Oil Consumption and Emissions, Controls Soot-Thickening and Wear API CJ-4, CI-4+, SM..., ACEA E9, DDC 93K218, Cummins CES 20081, MB 228.31, CAT ECF-3, ECF-2, ECF-1-a, Mack EO-O Plus, Volvo VDS-4, MAN 3575, Renault RLD-3, MTU Type 2.1 Product Code: OED Order
	Synthetic Heavy-Duty Diesel & Marine Motor Oil SAE 15W-40 (AME) AMSOIL Synthetic Heavy Duty Diesel & Marine Motor Oil is a premium diesel oil providing excellent performance in all types of diesel engines where highly effective control of wear and deposits is vital. Engineered with heavy-duty dispersant/detergent additives, its Total Base Number (TBN) of 12 neutralizes acids and controls soot thickening from Exhaust Gas Recirculation (EGR) and blow-by to protect against corrosion, cylinder bore polishing (wear) and varnish/sludge deposits. AMSOIL 15W-40 Diesel Oil resists heat and breakdown better than conventional petroleum oils for long-lasting performance and protection. Extends Drain Intervals, Advanced Soot and Wear Control Formula, Maximizes Fuel Economy, Reduces Oil Consumption and Emissions, Excellent Cold-Flow Properties AMSOIL Synthetic Heavy Duty Diesel & Marine Motor Oil is engineered for use in a wide variety of light and heavy-duty applications, including over-the-road trucks, off-road construction, marine engines, farm equipment, mining, industrial (pumps& generators) and personal automotive or commercial transportation. It is excellent for use with low- or high-sulfur diesel fuels in standard, turbocharged or supercharged engines, including diesels equipped with EGR systems. AMSOIL Synthetic Heavy Duty Diesel & Marine Motor Oil is recommended for diesel engines, gasoline engines and other applications that require any of the following specifications: SAE 15W-40, API CI-4+, CF, CF-2, SL, ACEA A3/B3, E2, E3, E5, E7, Global DHD-1, JASO DH-1, Mack EO-M+ EO-N, DDC Power Guard 93K214, Caterpillar ECF-1A, ECF-2, Cummins CES 20071, 20072, 20076, 20077, 20078, Volvo VDS-2, VDS-3, MB 228.1, 228.3, 229.1, MAN 271/3275, MTU Type 2, Allison C-4 Product Code: AME Order
	Series 3000 Synthetic 5W-30 Heavy-Duty Diesel Oil (HDD) AMSOIL Series 3000 100% Synthetic 5W-30 Heavy Duty Diesel Oil (HDD) delivers extraordinary lubrication in both diesel and gasoline engines found in commercial, fleet and personal vehicles. By combining the industry’s premier synthetic technology with AMSOIL premium additives, AMSOIL Series 3000 exceeds the higher performance demands of modern engines. It withstands the stress of higher heat, higher acid levels and excessive soot-loading found in EGR-equipped engines. AMSOIL Series 3000 Synthetic 5W-30 Heavy Duty Diesel Oil consistently outperforms conventional and synthetic diesel oils for long-lasting performance and protection. Extends Drain Intervals, Maximizes Fuel Economy, Maximum Protection Against Engine Wear, Controls Soot Thickening and Wear, Reduces Oil Consumption and Emissions, Excels in Extreme Temperatures AMSOIL Synthetic 5W-30 Heavy Duty Diesel Oil is recommended for diesel engines, gasoline engines and other applications that require any of the following worldwide specifications: API CI-4+, CF, SL, ACEA A3/B3, E2, Global DHD-1, JASO DH-1, Mack EO-M+, EO-N Premium Plus ’03, DDC Power Guard 93K214, Caterpillar ECF-1-a, ECF-2, Cummins CES 20071, 20072, 20076, 20077, 20078, Volvo VDS-2, VDS-3, MB 228.1, 228.3, 229.1, MAN 271/3275, MTU Type 2 Product Code: HDD Order
	Synthetic 10W-30/SAE 30 Heavy Duty Diesel Oil (ACD) AMSOIL Synthetic 10W-30/SAE 30 Heavy Duty Diesel Oil (ACD) is formulated with premium synthetic base oils that exceed both 10W-30 multi-grade and SAE 30 straight-grade viscosity requirements for outstanding performance in modern and older diesel engines. Unlike conventional SAE 30 motor oils, AMSOIL ACD has a naturally high viscosity index and does not contain paraffin (wax). It has a -33°F pour point and qualifies for SAE 10W, making it an all-season multigrade lubricant with a wide operating temperature range. AMSOIL ACD is formulated without viscosity index (VI) improvers. This shear-stable formulation is designed to stop viscosity loss and associated bearing and cylinder bore wear. AMSOIL Synthetic 10W-30/SAE 30 Heavy Duty Diesel Oil contains premium additives with a high 12 TBN to neutralize acids from blow-by, exhaust gas recirculation (EGR) and high-sulfur diesel fuels. It protects against damaging piston deposits, ring sticking and sludge. Outperforms Conventional Diesel Oils AMSOIL ACD is recommended for diesel engines, gasoline engines and other applications that require any of the following worldwide specifications: API CI-4+/CH-4/SL, CF, CF-2, Global DHD-1, ACEA A3/B3, E3, E5, JASO DH-1 • Mack EO-M+, EO-N Premium Plus ’03, Detroit Diesel Power Guard 93K214, Caterpillar ECF-1a, ECF-2, Cummins CES 20076/20077/20078, Volvo VDS-3/VDS-2, Mercedes Benz 228.1/228.3/229.1, MAN 271/3275, MTU Type 2 Product Code: ACD Order